Cambium Networks XE5-8, Hardware Installation Manual

Page: 10 / 52

Chapter 1: About This User Guide 10
Note
Country-specific limits apply, some bands require Dynamic Frequency Selection
(DFS). DFS bands operation subject to regulatory approval. Check Software
release notes for details.
Important regulatory information
The Enterprise Wi-Fi 6 AP product is certified as an unlicensed device in frequency bands where it is not
allowed to cause interference to licensed services (called primary users of the bands).
Radar avoidance
In countries where radar systems are the primary band users, the regulators have mandated special
requirements to protect these systems from interference caused by unlicensed devices. Unlicensed
devices must detect and avoid co-channel operation with radar systems.
The Enterprise Wi-Fi 6 APs detects and avoids functionality for countries and frequency bands requiring
protection for radar systems. The Enterprise Wi-Fi 6 APs is qualified for ETSI/FCC DFS certification (see
Note ) for radar detection and avoidance as per the law.
Installers and users must meet all local regulatory requirements for radar detection. To meet these
requirements, users must set the correct country code during commissioning of the Enterprise Wi-Fi 6
APs equipment. If this is not done, installers and users may be liable to civil and criminal penalties.
Contact the Cambium helpdesk if more guidance is required.
Human exposure to radio frequency energy
Relevant standards (USA and EC) applicable when working with RF equipment are:
⚫
ANSI IEEE C95.1-1991, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio
Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
⚫
Council recommendation of 12 July 1999 on the limitation of exposure of the general public to
electromagnetic fields (0 Hz to 300 GHz) (1999/519/EC) and respective national regulations.
⚫
Directive 2013/35/EU of the European Parliament and of the Council of 26 June 2013 on the
minimum health and safety requirements regarding the exposure of workers to the risks arising
from physical agents (electromagnetic fields) (20th individual Directive within the meaning of
Article 16(1) of Directive 89/391/EEC) and repealing Directive 2004/40/EC.
⚫
US FCC limits for the general population. See the FCC website at https://www.fcc.gov/ , and the
policies, guidelines, and requirements in Part 1 of Title 47 of the Code of Federal Regulations, as
well as the guidelines and suggestions for evaluating compliance in FCC OET Bulletin 65.
⚫
Health Canada limits for the general population. See the Health Canada website at http://www.hc-
sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct/index-eng.php and Safety Code 6.
⚫
BS EN 62232:2017 : Determination of RF field strength, power density and SAR in the vicinity of
radiocommunication base stations for the purpose of evaluating human exposure (IEC
62232:2017).
⚫
BS EN 50385:2017 Product standard to demonstrate the compliance of base station equipment
with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when placed on
the market.