Cambium Networks PTP 820C HP, Installation Manual

Page: 145 / 227

Chapter 7: PTP 820C HP Detailed Configurations Description 4+0 Single/Dual Polarization Direct Mount
Page 7-58
4+0 Single/Dual Polarization Direct Mount
List of Items
Item Description Quantity Remarks
1
PTP 820C HP Radios
2 See Models for
Radio Unit
2
PTP 820C HP Diplexer Units
2 See Models for
Diplexer Unit
3 PTP 820C HP Dual Coupler or DualSplitter 1
4 PTP 820C HP OMT/Splitter Kit 1
Required Tools
• Metric offset hexagon key set
• Metric wrench key set
Procedure
1 Mount the OMT (for dual polarization) or Splitter (for single polarization) to the antenna and secure
it with four screws.
Important: Verify that the O-ring is properly mounted between the antenna transition and the
OMT/Splitter.
o
If you are using a Splitter, adjust the twist on the Splitter Kit.
2 Perform one of the following steps, according to the required polarization (horizontal or vertical).
o
For horizontal polarization, locate the twist with the letter “H” on top.