Page 8
The PTP 670 Connectorized ODU is intended to work with separately mounted external antennas. External
antennas generally have higher gains than the integrated antennas, allowing the PTP 670 to cope with
more difficult radio conditions.
Mounting bracket options
The PTP 670 series supports three mounting bracket options. Select the optimum mounting bracket
arrangement based on the pole diameter and the ODU variant:
Bracket
Pole diameter
ODU variants
Bracket part number
Tilt Bracket Assembly
40 mm to 77 mm
(1.6 inches to 3.0 inches)
PTP 670 Integrated
PTP 670 Connectorized
N000045L002A
Tilt Bracket Assembly
with compression
straps
90 mm to 230 mm
(3.6 inches to 9.0 inches)
PTP 670 Integrated
PTP 670 Connectorized
N00004 third-
party band clamps
Mounting Bracket
(Integrated)
40 mm to 82 mm
(1.6 inches to 3.2 inches)
PTP 670 Integrated
N000065L031A
Note
The Tilt Bracket Assembly is included as part of the PTP 670 Integrated and Connectorized
Kits. If required, order the Mounting Bracket (Integrated) separately.
Note
The Tilt Bracket Assembly allows for elevation angle adjustment for the Integrated ODU
between –17° and +26°. The Mounting Bracket (Integrated) allows for elevation angle
adjustment between –26° and +41°.
