Page 10
Tilt Bracket Assembly with band clamps
1 Follow Step 1 for the Tilt Bracket Assembly procedure above.
2 Feed the band clamps (not supplied by Cambium) through the slots in the bracket body. Secure
the bracket body to the pole using band clamps, ensuring that the arrow in the body is pointing
upwards. Adjust the azimuth angle, and tighten the band clamps to a torque setting of 6.0 Nm
(4.5 lb ft).
3 Hoist the ODU to the mounting position. Fix the mounting plate to the bracket body with four of
the short bolts, using a 13 mm spanner or socket. Adjust the elevation angle, and tighten the
bolts to a torque setting of 8.0 Nm (5.9 lb ft).
1
2
3
4
5
2
3
