Page 30
UNDER DEVELOPMENT
Locking nut
Washer
M6 lug
Washer
Nut
Toothed washer
M10 lug to ground
4
Select a building grounding point near the LPU bracket and on the same metal. Remove
paint from the surface and apply anti-oxidant compound. Fasten the LPU ground cable to
this point using the M10 (large) lug.
Installing the LPU-PSU drop cable
Use this procedure to terminate the bottom LPU to PSU drop cable with RJ45 connectors at both
ends, and with a cable gland at the LPU end.
Warning
The metal screen of the drop cable is very sharp and may cause personal injury.
•
ALWAYS wear cut-resistant gloves (check the label to ensure they are cut resistant).
•
ALWAYS wear protective eyewear.
•
ALWAYS use a rotary blade tool to strip the cable (DO NOT use a bladed knife).
Caution
Check that the crimp tool matches the RJ45 connector being used, otherwise the cable or
connector may be damaged.
1
Cut drop cable to length required from bottom LPU to PSU.
