Chapter 2: Packaging and Installation of cnPilot
42
Wall Mounting
1. Choose location on the wall to mount the bracket using the four mounting screws and anchors (if
needed).
1. Connect the short Ethernet jumper cable between the two RJ-45 connections on the rear side of
e430.
2. Mount e430/e425H into the Generic Wall bracket by aligning the hooks.
1. Secure e430/e425H to the bracket using Torx (or standard) screw on the lower edge of
e430/e425H.
2. Power e430 either with a 48Vdc/1A power adapter or using the PASS-THRU port at the bottom
edge of the device using Ethernet power.