Chapter 2: Packaging and Installation of cnPilot
22
Mounting E400/e410/e600
Ceiling Mount
1. Determine where E400 needs to be mounted and remove the ceiling tile.
2. Using the hole template, mark the hole locations.
3. Drill the holes for the 4 mounting screws using a 5mm (3/6”) diameter drill bit.
4. Drill the RJ45 cable hole using a 15 mm (5/8”) diameter bit.
5. Hold the mounting plate on the top side of the ceiling tile and screw it on the mounting bracket.
6. Run the RJ45 cable through the 15mm hole and remount the ceiling tile.
7. Attach the RJ45 cable to E400.
8. Slide E400 into the mounting bracket.