Introduction
Instruction Manual, Feb-17
3
•
Lift/move/transport the system with the necessary care and with sufficient
manpower (install the transport security devices if applicable, transport it only in the
original packaging)
•
This symbol indicates that this equipment must not be disposed of as unsorted
municipal waste but is to be collected separately as electrical and electronic
equipment (WEEE-Directive 2002/96/EC). To properly recycle the instrument or
parts of it you are requested to send the equipment back to the distributor,
producer or an adequate collection system at the end of its life. This will have
potential effects on the environment and human health
•
Do not mix batteries -When replacing batteries, replace them at the same time with
new batteries of the same type
•
Exhausted batteries should immediately be removed from the equipment and
disposed of accordingly. When discharged batteries are kept in the equipment for a
long time, electrolyte leakage may occur and cause damage to the instrument
•
Laser (class 1) inside: Do not look directly into the laser beam
1.2
Parts supplied
Part no
Description
140.0450-1
Pneumatic kit containing:
672.1016 Hose clip Ø 8-16mm
672.0029 Hose PVC
115.0050 Hose fitting
672.0080 Hose black
370.0002
2 Battery 1.5V ,AA size
022.8450
Colum Saver 2µm, SST
B.022.8440E
Instruction Manual
2 Allen key (for maintenance of 6 port Valve)
Accessories and spare parts
Part no
Description
022.8446
Elution head for circular zones of 4mm diameter
022.8445
Elution head for oval zones of 2mm width
666.0001
10-32 (1/16”) RheFlex ® SS Fitting (nut and ferrule)
666.0002
Adapter -1/4-28 x 10-32 PEEK Interface 2
666.0003
Nanotight FEP tubing sleeve 1/16” OD
666.0004
Nanotight peek fitting (fingertight nut and ferrule)
666.4007
F-120 PEEK fitting
666.0017
Flangeless Nut 1/8"
666.0018
Flangeless Ferrule 1/8"
670.0030
Valve dummy connector (for protection)
022.8450
Colum Saver 2µm, SST
022.8420
Waste filter for cleaning sledge
660.0040
O-ring for waste container
Rotor seal for 6 port valve
Summary of Contents for TLC-MS INTERFACE 2
Page 1: ...INSTRUCTION MANUAL TLC MS INTERFACE 2...
Page 27: ......