cam SHP Series, Operating Manual

Page: 14 / 36

14/36
5. ASSEMBLY AND INSTALLATION
5.1. Packing list
Description Amount Reference
SHP sideshifter 1 See chapter 2.1.
Technical data
Operating manual 1 167TA5401
Spare parts list 1 See ‘10.3.
Spare parts list’
5.2. Safety instructions for assembly and installation of the product
• Wear safety gloves and safety shoes when installing the sideshifter.
• The assembly and installation must be carried out by an expert.
• Make sure that the goods and packaging are in good condition.
• Before commissioning, carry out a risk analysis on the assembly of the CAM attachment with
the forklift.
• Before using the sideshifter, carefully read the instructions in the manual of your lifting
device.
5.3. Installation of the product
• Before installing the equipment, a thorough visual check must be carried out in order to
make sure that no damage has occurred during the transportat and handling stage.
• In the event that one or more components are found to be damaged, it is necessary to
notify CAM attachments and agree on the measures to be taken.
• The lifting device with attachment needs to be approved for use prior to commissioning.
• Be sure to obtain the lifting device manufacturer’s certification concerning the residual
capacity of the lifting device after installing the attachment.
1. Remove the packing materials carefully.
2. Place the sideshifter on a flat surface and remove the two bottom hooks with their screws, bolts
and washers.