cam PANORAMIC EVO, Instructions For Use Manual

Page: 18 / 76

17
INSTRUCTIONS FOR USE
3. PREPARATION FOR INSTALLATION.
3.1 Check the harness shoulder belt height (Group 0+/1 use).
The harness straps' height can be adjusted, the top of harness straps should a
little higher than the children's shoulders, so that the child car seat can provide
the effective protection when the accident occurs.
3.2 How to lock the buckle.
Put the left and right tongue of the buckle together, insert the closed tongues
together into the buck le. When you hear "Click" it means the buckle locked.
Please be noticed the buckle only can be locked when two tongues connect
together.
3.3 How to open the buckle.
Press the red button on the buckle, the buckle will open.
3.4 Adjust the shoulder strap length.
Tight the shoulder strap.
One hand hold the child seat, another hand pull the ad just strap .
Loosen the shoulder strap.
Press the quick adjuster lever by one hand, another hand pull the shoulder
straps.
3.5 Adjust the height of headrest.
Loosen Harness belts : Press the quick adjuster lever by one hand, then pull
shoulder belt harness forward (as the arrow shows) by another hand to lose it.
Hold the seat base by one hand, then hold the handle ring of the headrest, pull
the headrest to the suitable height.
4.1 GROUP 0+1 INSTALLATION, REARWARD FACING. (CHILD WEIGHT 0-
18KG).
Adult three-point belt.
• Put the child car seat on the vehicle seat, rotate the seat body 180 degree to
rearward facing, and adjust the seat body to max incline. Continue push the
child car seat, make it close to the vehicle seat back.
• Put out the car belt, let diagonal belt go through belt guide at the backrest and
lab belt go through under the inner cushion, buckle it.
• Then tighten and flatten the belt, finish the installation.
Open the harness system, put the child into the car seat, and lock the harness
buckle.
4.2 GROUP 0+1 INSTALLATION, REARWARD FACING. (CHILD WEIGHT 0-
18KG).
Adult three-point belt+ISOFIX.
• Put the child car seat on the vehicle seat, rotate the seat body 180 degree to
rearward facing, adjust the seat body to the max inclination.
Aim 2 Fix connectors to the ISOFIX anchorages on vehicle seat, push to make it
connect, till you hear "click".
• Continue push the child car seat, make it close to the vehicle seat back.
Check the Fix release button, make sure the indicator turns to Green.
• Put out the car belt, let diagonal belt go through belt guide at the backrest and
lab belt go through under the inner cushion, buckle it.
• Then tighten and flatten the belt, finish the installation. Open the harness
system, put the child into the car seat, and lock the harness buckle.