cam AREA ZERO+, Manual, Page: 22 / 88

20
GROUP 0+ CAR SEAT
FOR CHILDREN UP TO 13 KGS
unit as shown in the figure. The base
must be horizontal on the seat unit and
well positioned.
7b . Fasten the 3 point vehicle belt.
7c. Take the abdominal belt “A” and place
it in the 2 side guides of the base.
7d. Place the car seat on the base, ensuring
the car seat pins fit over the locking catches
on the base. The car seat handle must be
in the carrying position (fig.1, part B).
7e. Push firmly downwards the car seat
on the base until you hear a “click”.
ATTENTION: make sure the 4 car seat
pins are correctly fitted on the base by
attempting to pull the car seat off.
7f. Take the belt “T”, wrap it around the
back of the car seat (1). Thread this part
of the belt through the rotating belt
guide in the back of the car seat (2) (3).
7g. Rotate the carrying handle into
the in-car obligatory position (fig.1,
part A).
7h. To fit in the correct way your car
seat, grip the car seat and keep it held
in place, and then with the other hand
pull firmly the “T” belt until the slack
has been removed and the belt is well
tightened.
ATTENTION: Always check the car seat is
correctly fitted by attempting to pull it off.
Make sure the car seat and the carrying
handle are leaning against the vehicle seat
unit. On the contrary, the vehicle seat unit
might be incorrectly adjusted or the car seat
might be incorrectly positioned.
8. REMOVING THE CAR SEAT FROM
THE BASE:
8a. Pull the “T” belt of the rotating belt
guide (1) and remove it from the back
of the car seat (2).
8b. Place the car seat handle into the
position for transport by hand (3).
ATTENTION : IF THE HANDLE IS IN THE
IN-CAR POSITION, THIS WILL PREVENT
THE CAR SEAT FROM BEING REMOVED
(SAFETY LOCK).
8c. Push the button on the back of the base
(4) and simultaneously lift the car seat (5).
To remove the base, unfasten the belt and
remove it from the guides.
9. WASHING INSTRUCTIONS: all fabric
parts can be hand washed at max 30°
with mild detergent (do not bleach).
Do not tumble dry, do not dry clean, do
not iron. Remove the hood and the
frame inside. Remove the cover as
shown in the figure.
10. SPARE PARTS FOR MODEL 138-134
1
S138/1 Canopy frame (optional)
2
S138/2 Canopy cover (optional)
3
S138/3 Head hugger (optional)
4
S156/4
Side buttons (right and left) for carrying handle
5
S138/5
Left shoulder strap
6
S138/6
Right shoulder strap
8 S138/8
3 point safety belt
9 S138/9 Cover adjuster
10 S138/10 Car seat cover
11 S138/11 Rotating belt guide
12 S138/12 Left and right polystyrene
13 S138/13 Left and right carrying handle indicators
14 S138/14 Anti slipping rubbers
15 S138/15 Instruction leaflet
16 S134/16 Car seat base
N CODE
DESCRIPTION