Mounting accessories
Yellow
DATA Rx
Brown
VCC (Power +)
3.
Technical specifications
(continuation)
The Davis compatible ultrasonic wind sensor
incorporates 12m of cable between the wind sensor
and the box.
50cm of cable terminated in RJ-11 comes out of the
box.
The wind sensor has been designed to avoid any
mechanical parts to maximize reliability and
minimize maintenance.
The transducers communicate between themselves
two by two using ultrasonic range waves. Each
couple of transductors calculates the signal delay
and gets information about both, wind direction and
wind speed.
The wind sensor has lateral and inferior female thread. It can be mounted either on a plate (inferior
screws) or on a tube (lateral screws).
North mark position
Make sure the north mark is perfectly aligned
M4x0,5
M4x0,5
Inside the box there are two connectors, one where
is connected the wind sensor and other where is
connected the cable for the Davis Station.
Pole mount up to 52 mm
Image 6. Wire connections.
Davis compatible unit connections:
Aluminio and Carbon Fiber poles
Wind sensor connections:
The box can be attached to the pole with cable ties or similar.
Davis Compatible
User manual
Davis Compatible
User manual
White
GND (Power -)
Green
DATA Tx
3.11 Wind
· Speed Range: 0-40 m/s
information
· Direction Range: 0-360 º
3.8 Connections
· Modular Connector (RJ-11)
3.7 Attached cable
3.12 Easy mount
-
3 x M4 lateral female thread
-
3 x M4 inferior female thread
3.10 Sensors
· Ultrasonic transducter (4x)
· 2xAA, 3.6V Lithium primary
batteries (duration 6 years)
3.6 Power
Adapter to Poles up to 39mm
Flat mount
Yellow
VCC (Power +)
Green
WIND Direction
Red
GND (Power -)
Black
WIND Speed
3.9 Internal Connections
