Manuale Uniflam Idro rev. 00
31
The circulator does not work
-
Make sure all electrical connections are in order
-
Make sure that the circulator is not blocked. In
case it is, unblock it manually by opening the
valve
-
Make sure that the measure of temperature is
positioned in the correct way and works
correctly
No hot water arrives at the radiators
-
Make sure that the valves are open and that
there is no water in the system
-
Make sure that all water connections are installed
in the right way
-
Make sure that the circulator is working in the
correct way
Excessive fume production
-
Make sure that no excessive deposit blocks tubes
and the stove
-
Make sure that the chimney is in order
-
Make sure that the valve works
Excessive deposit if combustion waste
-
Make sure that the wood used is dry enough
-
Do not use too big pieces
-
Do not burn treated wood and other materials
than wood
The door window becomes excessively dirty
-
Use better quality of wood (smaller pieces, better
dried)
-
Make sure that the fume tube is free of deposits
Insufficient sanitary water
-
Raise up the starting water temperature of the
circulator
-
Keep the flame lively
-
Check problems of the hydraulic system
The oven does not heat up
-
Keep the flame continuously
-
Use small pieces of wood to keep the flame
lively
-
Optimal service is only done after some circles
of functioning
