Caltta ZXIMCU PT01 P200 Operation Manual Download Page 26 | Manualshive

Page: 26 / 67

background image

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual

Page 18

© 2021 Copyright Caltta Technologies Co.,Ltd.

All rights reserved

Figure 5- 12 GIS interface of the dispatch console

The dispatch console supports both online and offline maps. Make sure the
dispatching PC has been connected to the map server before logging to the dispatch
console. If using online map, the PC is required to access to Internet before logging
to the DAS dispatch console, otherwise map data cannot be loaded.
Similar to general map operations, zoom in or zoom out the map by scrolling the
mouse wheel, drag the left mouse button to move the map, and search for locations.

The toolbar

is on middle top of the map , which provides

functions of Zoom in, Zoom out, Frame select, Ranging, Clean, and so on.

5.1.3.4

General Operations of Video Dispatch

Select

Video

on the menu to display the video dispatching interface

The upper part of the video dispatch area is the split-screen control button, which
controls the single screen, 4-split screen, 9-split screen, and 16-split screen of video
display. It also controls self-defined split screen, self-defined allocation and editing,
and split screen / full screen display. The system displays different video split screen
layout in accordance with different split screens, and switches the number of
displayed screens.

«
...
24
25
26
27
28
...
»

Summary of Contents for ZXIMCU PT01 P200




































































Reviews:

No comments

Related manuals for ZXIMCU PT01 P200

Brand: Eaton Pages: 16

Brand: Zolix Instruments Pages: 22

Brand: ZIMO Pages: 38

Brand: Easy-Laser Pages: 84

Brand: Easy Heat Pages: 4

Brand: Hanna Instruments Pages: 88

Brand: L. G. B. Pages: 2

Brand: L-Acoustics Pages: 36

Brand: nekos Pages: 8

Brand: nekos Pages: 8

Brand: Neles Pages: 12

Brand: Uniden Pages: 28

Brand: UniFocus Pages: 23

Brand: UniFocus Pages: 6

Brand: Measurement Computing Pages: 32

Brand: HomeMatic Pages: 36

Brand: Kohler Pages: 48

AUTOPULSE IQ-318

Brand: Notifier Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands