®
SECTION 4: SELECT FROM LIST
making
since 1986
water work
4B.2.1 Access Control:
If the controller being contacted has Access Control
restrictions in place, the user will have to send an
Access Code to the controller prior to making any
changes to station information or learning expected
flow rates for a given station.
When MAKE CHANGES is selected on the SELECT
A STATION screen the LOG IN screen will appear
as shown (Figure 4.2.1.1).
LOG IN
Access Code: - - -
(push SELECT
to Log In )
Figure 4.2.1.1
1. Press the
RIGHT/LEFT ARROW
keys to move the highlight to the
desired choice.
2.
3.
Press the
SELECT/EDIT
key
once an access code
has been entered.
Once access has been established the SELECT
WHAT TO CHANGE screen will be displayed figure
4.2.1.2
1:
2:
3:
SELECT WHAT TO CHANGE
Station Run Times
Expected Flow Rates
Figure 4.2.1.2
4B.2.2 Station Run Times:
From the SELECT WHAT TO CHANGE screen
( Figure 4.2.1.2).
1.
2.
Press the
SELECT/EDIT
key
once
STATION RUN TIMES
has been chosen.
Controller individual station screen is displayed
(Figure 4.2.2.1).
Sta 15
Total: 5.0 mins
Cycle: 1 mins
Soak: 5 mins
Figure 4.2.2.1
3.
Press the
PLUS/AUTO
or
MINUS/AUTO
keys to scroll
through the menu choices.
Press the
PLUS/AUTO
or
MINUS/AUTO
keys to scroll
through each of the controller’s
stations.
Press the
PLUS/AUTO
or
MINUS/AUTO
keys to
increase of decrease the
highlighted section.
