SECTION 5: CHANGE LIST
®
making
since 1986
water work
ADD CONTROLLER TO HANDHELD
The HandHeld must be on the
ADD CONTROLLER screen. Then push
The button below and wait
for the response.
Add This Controller to the Handheld
OK Controller has been added
Figure 5.0.5
The handheld unit will be displayed (Figure 5.0.6).
select
RADIO REMOTE
OK S/N 27004 added.
ADD A CONTROLLER
At the controller
MAIN MENU
Figure 5.0.6
Note:
Write down each controller’s serial number
and the physical location or controller name that you
want to assign to it later. This will aid you in entering
the information when using the IR-Interface software
on your PC or laptop computer.
6.
Press the
BACK/MENU
key
to return to the CHANGE LIST
screen (Figure 5.0.2).
5B. PC Communications
This option allows the user to obtain a controllers
information from a desktop computer using the IR-
Interface Software program (or by use of Command
Center Software) and an RRe-IR Interface unit.
The RRe-Interconnect software allows the user to
assign individual names to each Hand Held remote
and Regions, Sites, and Controllers assigned to the
handheld remote.
See the CC4 Water Management Manual Section
33 IR-Interconnect or IR-Interconnect Software
Users Guide for more information.
5C. Delete Controllers !
From the CHANGE LIST screen (Figure 5.0.2).
1.
2.
Press the
SELECT/EDIT
key once
The DELETE CONTROLLERS !
Choice has been made.
The DELETE !! AREA screen is displayed
(Figure 5.0.7).
DELETE ! ! AREA
#My Added Region
Figure 5.0.7
3.
Press the
SELECT/EDIT
key once
More to chose the region shown.
The DELETE !! SITE screen is displayed
(Figure 5.0.8).
DELETE ! ! Site
#My Added Site
(OFF) key to DELETE
Figure 5.0.8
Press the
PLUS/AUTO
or
MINUS/AUTO
keys to scroll
through the menu choices.
