SECTION 1 RRe-TRAN
®
making
since 1986
water work
1B. RRe-TRAN Technical Specifications
Transceiver Output: Maximum 2.0 watts
Compatibility
Temperature: -30 degrees to +60 degrees Celsius
Receiver Sensitivity: -110dBm
ET2000e: All Versions
Construction
Model Numbers
Transceiver
RRe: Calsense enhanced
Dimensions: 2.3” x 4.4” x 1.3”
integrated Radio
Case: Black ABS
Remote board.
RRe-TRAN: Calsense enhanced
transceiver compatible
Only with the RRE Radio
Remote board.
1C. Equipment Inventory
Nomenclature Part Number
1
Carrying Case RRe-CASE
1 Handheld Radio Remote
RRe-TRAN
1 6 ¾ inch Whip Antenna
RRe-TRAN-ANT
1 9 VDC Charging Adapter
RRe-CHG
1 RRe-Interface Adapter
RRe-IR
1
RRe-TRAN User Guide PG3-RRe-TRAN-D2
1 RRe-Interface Software Disk COMM-2
1D. RRe-TRAN Key Map
Range Test
Screen shows
when access
codes are in
use.
Highlighted
selection.
There are No
CONTROLLERS in the list
Button Key:
The
PLUS / AUTO
button is used to scroll
from bottom to top of a sellected screen, also
PLUS/AUTO option allows user to turn off
single valve irrigating and turn on next
numerically higher value in sequence. Also
The
SELECT/EDIT
button
is used to make a
choice of a highlighted item, or to select an
item for editing.
Legend:
Direction of
Travel.
Select From List
Change List
Setup
Battery Status
There are No
CONTROLLERS in the list
Select a Region
Delete Controllers !
Add via Controller
PC Communications
Select a Site
Controller Status
Make Changes
Select a Controller
Log In
Station Run Times
Expected Flow
Rates
Station Number
Delete Region
Delete Site
Delete Controller
Note:
screens are only
available on 608.j ROM
controllers and above,
when older ROM version
controllers are contacted
"
No Editing
" will appear
on Controller Status
screen.
The
OFF/PAUSE
button is used to turn the
RRe-TRAN Handheld Radio Remote OFF, or
to PAUSE any highlighted station valve
currently irrigating.
The
BACK/MENU
button is used to return to
the last screen viewed.
Screen shown
when no
controller exist.
The
ON/RESUME
button is used to turn the
RRe-TRAN Handheld Radio Remote ON, or to
RESUME any highlighted station valve currently
paused.
Screen used in
conjunction with
IR-Interconnect
/ Command
Center
software.
The
MINUS / AUTO
button is used to scroll
from bottom to top of a sellected screen, also
MINUS/AUTO option allows user to turn off
single valve irrigating and turn on next
numerically higher value in sequence. Also
The
LEFT ARROW
button is used to navigate
the highlight cursor to the next availible
position to the left of any screen.
The
RIGHT ARROW
button is used to navigate
the highlight cursor to the next availible position
to the right of any screen.
