Calrec Hydra2, Installation Manual

Page: 58 / 104

58 HYDRA2
Installation Manual
Fixed Format I/O
Line Out 1-16
Signal
Pins
+ / -
Output 1 A / B
Output 2 C / D
Output 3 E / F
Output 4 J / K
Output 5 L / M
Output 6 N / P
Output 7 R / S
Output 8 T / U
Output 9 Z / AA
Output 10 BB / CC
Output 11 DD / EE
Output 12 FF / HH
Output 13 JJ / KK
Output 14 MM / NN
Output 15 PP / RR
Output 16 SS / TT
Screen H , V, W, X, Y, LL
Line Out 17-32
Signal
Pins
+ / -
Output 17 A / B
Output 18 C / D
Output 19 E / F
Output 20 J / K
Output 21 L / M
Output 22 N / P
Output 23 R / S
Output 24 T / U
Output 25 Z / AA
Output 26 BB / CC
Output 27 DD / EE
Output 28 FF / HH
Output 29 JJ / KK
Output 30 MM / NN
Output 31 PP / RR
Output 32 SS / TT
Screen H , V, W, X, Y, LL
• Note, all EDAC connectors on the I/O box, for both inputs and outputs are male , requiring that interfacing cables are terminated
with
female
connectors. The AE5991 provides 8 inputs per connector, each with its own screen/ground pin. Input connector pins
not listed in the tables are also grounded. The output connectors provide 16 outputs each. Only 6 earth pins are available in each
output connector. If the installation dictates that individually screened 2 core cable must be used for line level outputs, and that
they must have screens terminated at the source rather than destination. Multiple cable screens will need to be landed on each
connector pin.
AE5991 – EDAC PIN-OUT – OUTPUTS (“STYLE 1“)
• 38 pin EDAC—viewed from male
mating side / female wiring side
Positive / Phase
Negative / Antiphase
Ground / Screen