Calrec ARGO, Installation & Technical Manual

Page: 73 / 92

73
TFT METER PANEL - MD6573
MD6573 - ARGO S & ARGO Q TFT METER PANEL
DISPLAY CONNECTOR LAYOUT Connections
This panel has two separate connectors
for power and video display placed
on the back of the panel.
The TFT Meter Panel connects to the
UN6539 section processor which
provides:
Power via a 4 pin 12v DC connector.
Video display data via a DP Display port
1.4 Interface using a full size DP latching
connector.
The MD6573 TFT Meter panel provides
the Argo S/Argo Q with a graphical
user interface to provide a 1920px
x 1080px TFT video display of the
various audio input and output levels
of the console. Typically the Meter
panel shows audio metering displays.
These panels are generally fitted
across the required surface size.
The MD6573 is 378.5mm wide x 228mm
high and uses the same 1920px x 1080px
TFT screen as the MU6572. It is primarily
used to display Audio Meters Rendered
Bar Graphs and optionally display Input
video via the Video SFP inputs on the
section processor.
The image below shows an example
combination of Audio Metering and a 1/4
screen input video image.
The TFT Meter display does not use the
touch control circuitry as it is a display
only module so no USB touch connection
is required.
The Display backlight level and enable
control are provided using baseband
signalling over unused DP pairs on the DP
connector.