Calpeda Duomat-E Series, Installation, Operation & Maintenance Instructions Manual

Page: 29 / 36

- 29 -
11 TECHNICAL SPECIFICATION
Calpeda Ltd reserve the right to amend the specification without notice.
10.11 Noise: The equivalent continuous A-weighted sound pressure level at a
distance of 1 metre from the pump does not exceed 70 dB(A).
Pump Model Unimat-E35 Duomat-E35 Unimat-E50 Duomat-E50
General
Guarantee 2 year
Approvals CE
Features
Sealed system capacity Up to 300,000 litres
Mounting Wall or floor mount
Pump control system
   
Intelligent control interface
   
System fill mode
   
Dry run protection
   
Typical noise 60 dB(A) 60 dB(A) 62 dB(A) 62 dB(A)
Materials Break tank Polyethylene
Front cover Acrylic capped ABS
Performance Maximum fill pressure 3.5 bar (350 kPa) 4.1 bar (410 kPa)
Maximum flow 17 l/min 20 l/min
Maximum inlet pressure (tank fill valve) 7 bar (700 kPa)
Maximum working pressure 6 bar
Ambient air temperature range Min 4
o
C / Max 40
o
C
Relative humidity 95 % non-condensing
Min./Max. water temperature Min 4
o
C / Max 23
o
C
Water tank
Usable water capacity 8 litres
Inlet valve and fill rate Torbeck (side entry) 12 l/min
Fluid category CAT 5 (type AB air gap with weir)
Connections
Cold water inlet and outlet 15 mm compression x 600 mm flexible hose
Overflow G ¾ (19 - 23 mm diameter pipe compression fitting)
Pump Number of pumps 1 2 1 2
Pump mode Duty Duty-standby Duty Duty-standby
Pump type / head / impeller Peripheral / brass / brass
Motor type Induction (thermal trip, auto reset)
Duty rating Continuous (S1)
Electrical Power supply (Vac/Ph/Hz) 230/1/50
Power consumption - P1 380 Watts 545 Watts
Current - full load 1.7 Amps 2.4 Amps
Fuse rating 5 Amps
Power cable length 1.5 metres (pre-wired)
Alarm output Multiple
Physical Enclosure protection IPX4
Width 415 mm
Depth 270 mm
Height 504 mm
Weight - including fittings 13.4 Kg 19.4 Kg 13.4 Kg 19.4 Kg
Weight - filled 23.4 Kg 29.4 Kg 23.4 Kg 29.4 Kg