background image

 

                         Using The Cooktop

Power Management

Automatic Power Level Control

Touch “- ” key or “+” key to adjust the desired power level;
NOTE: During cooking, the unit is equipped with safeguards against parching. 
Heating will appear intermittent phenomenon when cooking element is used for 
frying, stir-frying, grilling and other high temperature cooking formats.

To Turn Off 

The power level displayed may be different from the actual power level at the power 
sharing and high temperature range. To prevent the cooktop from overheating, the 
power level is controlled automatically.

Power Boost

 

Keep Warm

WARNING

WARNING

While in the Power level 1, touch “ ” 
key to enter into Keep Warm mode, 
Power digital will switch from 1 to L.

9

In the Boost status, touch “ ” key or 
after 10 minutes the power boost 
setting will switch off automatically,  
Power Boost indicator light will turn off, 
Power digital will switch from P to 9.

                             

Power Boost is only 

recommended for BOILING WATER.

                             

                             Do not leave a pot 
unattended while in 

Boost Mode or 

other high power settings.

The 'Boost' function is used to cook at 
maximum power for a short period of 
time (maximum 10 minutes). The 
power is reduced to level  9 at the end 
of the maximum boost time.

1. Touch the ON/OFF key of the 
cooking element being used, a “beep” 
will sound and Power display will turn 
off,  and the corresponding cooking 
element will turn off, indicating 
touched cooking element shut off. 

2. Touch the Main Power key pad to 
turn off the entire cooktop, a “beep” 
will sound and all indicator lights will 
turn off, indicating the cooktop enter 
into the 

Standby

 mode.

Summary of Contents for CICT244


























Reviews: