Choose a location for the panel mounted USB plug. Its location should be chosen for convenient
connection of a USB key during normal operation of the machine. Punch a hole in the desired
location to the dimensions shown below. Insert the panel mount USB connector through the hole
and secure with the attached nut. Ensure that the gasket included with the kit is used to prevent
contaminants from entering the enclosure. The cap of the panel mount USB connector snaps
onto the connector house. (Note: the A side of the USB connector faces out of the pendant while
the square B side of the USB connector faces into the pendant). Connect the USB plug to the
controller with the USB cable provided.
Locate the serial port connector of the CNC. Attach one end of the CAT5 cable to the serial port
connector of the USBCNC controller. Attach the other end to one of the DB25 connectors
included with the kit. Both male and female connectors have been provided. Choose one as
appropriate. In most cases, it is best to simply pull the serial connector in from its mounting
assembly and connect inside the pendant as shown below.
