Introduction
This manual is intended to provide a description of the installation procedure for the Calmotion
USBCNC universal disk key reader.
Requirements
The USBCNC device will work with a CNC control with a standard DB25 RS-232 serial
connection to the control box for the purposes of input/output of CNC data. Typically, the CNC
manufacturer refers this as read and punch tape functions.
Please review the instruction manual thoroughly before
beginning installation. In addition, the installer should verify
that proper space and clearance has been taken into account
prior to drilling holes in the CNC pendant. This includes
cable bending radius and cable length.
