3.8 CHECK BRINE VALVE
ASSEMBLY
Check if the brine valve is mounted
correctly. This brine valve is located in
the provided space in front of the unit.
It must sit all the way at the bottom
and with the right side up. (see figures).
3.9 CHECK BRINE VALVE
CONNECTION
Verify if the brine valve is connected
to the softener in the right way. The
black tube Ø4mm comes from the
brine valve, and must be connected
with the small T-piece. This T-piece
connects the two pieces of brine tube
that come from both units.
Make sure that all tubes are fitted in
the connections as far as possible.
Check if there are no kinks in the tube
and that the tube is not squeezed
together.
11
Summary of Contents for Duplex
Page 1: ...Non Electric Softeners OPERATING MANUAL...
Page 2: ......
Page 18: ...Non Electric Softeners...