upro
mx
User
Guide
(v1.0)
©2011
Callaway
Golf
Company
Page
6
of
24
1.2 Charging the Callaway UPRO MX
Prior to operating your upro mx the battery must be fully charged. Follow these steps to charge the battery:
1) Remove the battery cover on the upro mx. Using your finger, un-screw the screw head located on
the back of the device until the battery cover is loose, and can be removed by lifting up gently.
Figure 2: Battery Cover Removal
2) Insert the Li-Ion rechargeable battery into the battery compartment. Angle the battery such that the
bottom edge with the three contacts makes contact with connector on the upro mx first and then
push the top side of the battery into place. The text on the battery should be face up and readable
(the Callaway logo will face down).
3) Replace the battery cover.
4) Insert the micro-USB connector of the included USB cable into the USB connector on the bottom of
the upro mx.
5) Connect the larger end of the USB cable to the included wall adapter.
6) Plug the wall adapter into an AC wall outlet. The upro mx’s red LED will be lit while charging. This
LED will begin to flash when charging is completed. Charging the battery completely takes
approximately 3 hours. For more information regarding safe handling of your battery, please
review Section 5.3 below.