0
A L K A L I N E I O N I C W A T E R S Y S T E M
How to Use
Initial operation
To select Alkaline water
To select Acidic water
Note: Acidic water is for external use only. DO NOT DRINK
POWER UP YOUR IONIZER.
Turn the power button on.
The appliance goes into the standby mode after all the indicators go on and off
with a sound.
TURN ON THE WATER
Turn on your water supply opening you valve of faucet.
If you have your ionizer connected to your faucet with a civerter,
Turn thd lever to “divert the water to your ionizer.
Repeat steps 1-3 above, or with water is already running through the ionizer then:
Repeat steps 1-3 from Initial Operation; or with water
already running through the ionizer then:
Depress the “ACIDIC” button to select the desired setting from
1 – 4. You will hear a voice confirmation that “Acidic water” has
been selected, and the display panel will show an orange symbol
and an orange number corresponding to the level selected.
Note: Your ionizer will always “remember” the last setting used.
If the previous selection was Acidic Level 2, when you start
flow through the ionizer next time you use the ionizer it will
automatically process at Acidic Level 2.
To select a different level, depress the “ACIDIC” button to move to
next level until the desired setting level is achieved. The orange
symbol and number will change accordingly.
Depress the “ALKALINE” button to select the desired setting from 1–4.
You will hear voice confirmation that “Alkaline water” has been selected, and the display panel will show
a blue symbol and blue number corresponding to the level selected.
Note: Your ionizer will always “remember” the last setting used.
If the previous selection was Alkaline Level 2, when you start flow through the ionizer next time you use
the ionizer it will automatically process at Alkaline Level 2.
To select a different level, depress the “ALKALINE” button to move to next level until the desired setting
level is achieved. The blue symbol and number will change accordingly.
START WATER FLOW THROUGH YOUR IONIZER
– Depress the “POWER” button which opens the internal valve in your ionizer.
– The Digital Filter Life Indicator will begin to register numbers and you will hear your ionizer’s “voice”
announcing the selected mode of operation. For instance: “Purified water selected”.
– NOTE: The water may initially come out discolored (light to charcoal gray) due to carbon particulates
in the new filter. This is not harmful and is typical of all carbon filters. Allow the water to flow
for 2-3 minutes in the “Purified” mode and this will flush all the carbon dust.
POWER
POWER
ALKALINE
ACIDIC
Alkaline water levels
Note: pH levels will always vary with different source water.
Descriptions of Acidic water levels
Note: pH levels will vary with different source water.
Weak Alkaline water (pH7.5 – pH8.5).
This level is used for initial consumption
period (4-7 days). Let your body adjust
slowly to this increase in pH.
Weak Acidic water (pH6.5 – pH5.5). Used
for oral hygiene, mouth wash etc.
Medium to Strong Acidic water
(pH5.5 – pH5). For cleaning in
the kitchen.
Weak to Medium Alkaline water (pH8
– pH9). Move up to this level after the
initial adjustment period. Adjust to
this level for 3-4 days. Most people
will drink at level 2 or 3.
Weak to Medium Acidic water
(pH6 – pH5.5). For skin care,
as an astringent.
Strong Acidic water (pH5 and lower).
For sterilization purposes.
Strong Alkaline water (pH9.5
– pH10+). Generally, most people
find this very strong tasting and with
powerful detoxifying effects.
Medium to Strong Alkaline water (pH8.5
– pH9.5). This is the most common level
of alkalinity for drinking purposes. Some
people may start to detect a strong
change in taste.
