CALITEK Pro CMH 315W Manual Download Page 11

• When installing a new CMH lamp, be sure to check that your device is not connected to any power source.

• Use gloves and water on a soft cotton cloth to keep your fixtures clean by doing minor or major cleaning as 

much as possible. (The use of alcohol or a soft, dry cloth is compatible, but do not use any type of detergent.)

• Make sure the new CMH lamp is clean and free of any oil residue or fingerprints that may have been left 

behind when handling the bulb. (Use pure alcohol or wipe it with a soft, dry cloth).
• Hold the CMH lamp by the base and align the 2 contact pins with their respective receptacles.
• Once the 2 contact pins are aligned, you can gently push the lamp inward, then continue rotating the lamp 
clockwise to lock the lamp in place.
• Wipe the lamp with a clean, dry, soft cloth.

• Always be careful not to touch the reflective material with your bare hands as it may overheat the natural oil 
in your skin and permanently mark the reflector of your device.

WARRANTY

CALITEK warrants that the mechanical and electronic components of its products are free from defects in 
material and workmanship if used under normal operating conditions for a 

period of 2 years from the date of 

original purchase

. If the product has defects during this period and the defect is not due to user error or use 

by the importer, CALITEK, at its option, will replace or repair the product using the products. / new or recondi-
tioned parts appropriate. 

For HID lamps, the warranty period is one (1) year from the original purchase

. In 

the event that CALITEK decides to replace the entire product, this limited warranty applies to the replacement 
product for the remaining original warranty period.
CALITEK will not be liable for any damage caused by the operation of the unit, whether incident or any type, 
including, without limitation, damage or injury to other products or machinery or buildings. Liability will also 

not be accepted for loss of time or profit, loss of finished product or for any inconvenience caused in any way 

whatsoever.

- - - - - - - - - - - - - - - - - - - - - - - - - - WARNING - - - - - - - - - - - - - - - - - - - - - - - - - -

IN  CASE  OF  DATA  ON  THE  INSTALLATION,  USE  OR  TROUBLESHOOTING  OF  THIS  PRODUCT,  PLEASE 

CONTACT A QUALIFIED ELECTRICIAN.

MAKE SURE THE CORD IS NOT ROLLED AND IS IN CONTACT WITH NO HOT SURFACES.

NEVER USE THE BALLAST WITHOUT A LAMP OR REFLECTOR!

CALITEK LIGHTING SYSTEMS ARE DESIGNED AND TESTED TO SUPPORT CERAMIC METAL HALIDE LAMPS 

(CMH) ONLY. DO NOT USE OTHER TYPES OF LAMP OR LAMPS OF DIFFERENT POWER, THEY MAY CAUSE 

DAMAGE TO YOUR BALLAST AND LAMP.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

pro cmh 

315

w

EN

Summary of Contents for Pro CMH 315W













Reviews: