changes from blinking to solid then back to blinking, release the button. The
initial setting is to clear any factory preset. No initial setting is necessary for
subsequent remote.
2
．
Press and hold learning button on receiver for 2-3 seconds, release after
light turns solid. Press and hold remote button until light blinks.
3
．
For dual button remote, choose any button for set up.
4
．
Receiver can set up for a maximum of 80 remotes. (Note: The very first
remote will be canceled if 81
st
remote is set)
4. Instruction for dual function remote (Numeric and Learning Mode)
1. Before using the new remote, unscrew the bolts on the
back of the remote (see figure)
2.
“STUDY” and ”DECODE”
。
Choose from “STUDY” or “DECODE”. For learning mode
choose STUDY, for numerical mode choose DECODE. (Factory setting:
Learning Mode)
3. Battery is included. The remote can be mounted to car using visor clip.
Slide clip into the groove on the back of the remote, make sure it is fulled
inserted.
