Remote Control & Timer Delay Closing
Figure 23
A.
Remote Control delay closing
1.
Choose time delay to activate operator between 0~6 seconds by turning knob on
DELAY
15
Features
Figure 22
2. CLOSE Sensitivity: Increase/decrease amount of force by turning knob clockwise/
counter clockwise. This is the fourth blue knob on the circuit board. Figure 22, left.
1. OPEN Sensitivity: Increase/decrease amount of force by turning knob clockwise/
counter clockwise. This is the third blue knob in the circuit board. Figure 22, left.
3. Test device sensitivity every 6 months.
Sensitivity
The sensitivity has to do with the weight of the gate, and also other factors. A heavier gate will require
less sensitivity, and a lighter gate will require more sensitivity.
If a gate is too sensitive, the gate may stop or reverse by itself. It it's not sensitive enough, it might
not stop or reverse.
1. On your gate operator circuit board in the bottom, turn Dip Switch #2 to the ON
position. Figure 24
2. On the gate operator circuit board, adjust the delay by turning the second blue knob
from 0-60 seconds. Figure 25
Auto Close
This allows your gate to automatically close after opening it.
Figure 24
Figure 25
