PGUI / PGUI32 Training Manual
1.1
15
3.
PGUI Main Window
The PGUI program is started by double clicking on the PGUI icon under Windows 3.1
or selecting
the PGUI program from the Windows 95
Start Menu, Programs. Each time the program is started, it
will try to connect to the AC Source if it was connected at the time the program was closed. If not or if
the AC source cannot be found at the same IEEE address or serial port, the PGUI will launch in
simulation mode.
This chapter will familiarize you with the information displayed on the Main program window. The
main window is primarily used to control the steady state output of the AC Source. It also contains all
the menus, the status bar and the toolbar.
