9
Customer Support: 1-866-409-4581
Electrical Power
Electrical Power Requirements
Before using the motor/pump, refer to the serial label for voltage
and amperage requirements. Make sure you have a sufficient
electrical supply for supporting the motor's requirements.
Use a dedicated (110v 60hz) (15 amp) power supply.
Low voltage and/or an overload circuit can cause the motor's
overload protection system circuit breaker to trip.
If used as an air compressor with air tank.
Use a dedicated (110v 60hz) (15 amp) power supply
Max: 14 gauge 100ft extension cord
Min: 3000 Watt Running Generator
WIRING MOTOR/PUMP
Wiring Instructions
Black & White Wires (hot) - To Power Supply
Green Wire - To Ground
Air compressor surfaces become hot during
operation.
DO NOT touch hot surfaces, because they can cause
severe burns.
Do not touch the air compressor’s cylinder head.
During operation, the cooling fins of the cylinder
head and delivery pipe become hot.
Allow the air compressor to cool before touching it.
DO NOT place a storage cover on the unit during
operation. Only place a cover on the air compressor
after it has thoroughly cooled down.
FIRE
HOT SURFACE
WARNING
