California Air Tools 200CR Owner'S Manual Download Page 15

15

Customer Support: 1-866-409-4581

Exclusions 

In addition to the foregoing disclaimers, limitations and terms, this limited warranty shall not apply to and does not cover accessories, nor 
does it cover products that are in any way subject to any of the following: 

1.

 Improper setup, installation or storage. 

2.

 Lack of proper maintenance and service. 

3.

 Accident, damage, abuse or misuse. 

4.

 Abnormal operating conditions or applications. 

5.

 Repair or modification by customer or any third party without written consent of California Air Tools Inc. 

6.

 Use under operating conditions or in applications not recommended by California Air Tools Inc. 

7.

 Normal wear. 

8.

 The use of accessories or attachments not recommended by California Air Tools Inc. 

9.

 Acts of God. 

The application of these exclusions will be determined at the sole discretion of California Air Tools Inc. 

 

Registration 

Warranty registration with California Air Tools Inc. is required on all products. 

You can mail the enclosed registration form or register on-line at www.californiaairtools.com. 

Click on the Customer Service Tab and the Product Registration Tab. 

 

Trouble Shooting & Maintenance Guide

 

California Air Tools provides information on our website WWW.CALIFORNIAAIRTOOLS.COM. 

The trouble Shooting & Maintenance Guide provides valuable information regarding set-up, operation, maintenance and trouble shooting. 

Please visit our website and view these videos for beneficial information. 

 

Service or Parts 

Warranty is also available by keeping and showing your original receipt from the date of purchase to an  

Authorized California Air Tools Service Center. 

 

For customer service (M - Th)  8am - 4pm Pacific Time)  

1-866-409-4581  

 

or visit 

 

WWW.CALIFORNIAAIRTOOLS.COM 

 

 

Go to the “Contact Us” Tab 

 

Click on “Service” or  the “Parts” Buttons for the Fastest Service.

 

 

 

 

Summary of Contents for 200CR
















Reviews: