CALIFORNIA ACCENT LIGHTING, INC.
2034 E. Lincoln Ave. #431, Anaheim, CA 92806
ph. 800.921.CALI (2254) or 714.535-7900 \ fx. 714.535.7902
[email protected] \ calilighting.com
© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.
Installation Instructions
market
LITE
™
ML
2000-CM
6 of 11
Cable Lock & Mounting Plate
1.
Mount eye hook to desired surface.
TIP:
Ensure mounting surface is appropriate and capable of supporting the
weight of the light fixture.
2.
Loop aircraft mounting cable through eye hook and secure
cable lock to achieve desired tension.
NOTE:
Leave at least 3” slack from exiting hole of cable lock.
4.
Fasten locking once when desired tension is achieved.
3.
Using tensioning tool (not included) to eliminate unwanted cable slack.
Eye hook
Mounting surface
3” slack
Locking pins
Cable Lock
(ML2000-CL-1/8”)
Mounting Plate
(ML2000-MP)
1.
Mount mounting plate to desired surface.
TIP:
Ensure mounting surface is appropriate and capable of supporting the
weight of the light fixture.
2.
Lead a tie wrap through the mounting plate eyelet, then feed aircraft
mounting cable through tie wrap loop.
3.
Pull tie wrap until aircraft mounting cable is secure against mounting
plate, then cut off excess tie wrap.
Tie wrap
Mounting aircraft cable
Aircraft cable secured by tie wrap
