Got It!™ FAQs (Frequently Asked Questions)
162
visit us online at califone.com
Setup Menus:
•
COM port setup:
If there is no communication between remotes and
the receiver, check the COM port setup menu to
confirm that the
ClickDaemon
software is set to
the correct COM port.
Click the
Tools
button, and select
COM port
setup
from the drop-down menu.
If no ID number appears, wait two seconds and try
again. If the remote is still not recognized by the
program, check the positioning between the remote
and the receiver – there should be a clear line of sight
between the two with no obstructions.
If there is still no communication between receiver and
remote, check the receiver’s connection to the computer
to be certain the USB connector is firmly inserted. Also,
make sure you are using fresh batteries with the remote.
If there is still no communication, check the COM port
setup menu to confirm that the ClickDaemon software is
set to the correct COM port. (See Below)