21
GRILL BURNER ASSEMBLY AND USE
The Rockwell by Caliber™ Grill is equipped with 3 high quality, non-rusting, patented Crossflame Stainless Steel
burners which when coupled with the patented burner radiants produce an even intense heat that will grill uncom-
monly even. With this ultra-even heating of the grill, you will be able to cook your food wherever you please and not
be concerned with “finding” or avoiding the “hot spot” that most other grills have.
Caliber Crossflame Burner - The patented U-shaped grill burner with its unique crossover porting bars is the
heart of the even grilling system and should be locked in place with its retaining bracket as shown below.
Please assure that all grill burner components are in place before you grill (middle radiant not in place below):
Note
: The vertical Stainless Steel panel
that rests on the pins between each
burner. These panels are “Heat Zone
Dividers” and give you ultimate control,
not just over the entire grill surface, but
within each zone over each burner. As an
example, one zone may be set on high for
searing steaks while another may be grill-
ing fish or other delicate items at a lower
temperature just one burner over.
Patented U-shaped
Caliber Crossflame Burner
(radiant must be placed on before grilling)
Searing Station
(only on 48” grill and no
radiant placed above)
Peak Shaped Radiant
(place on top of U-
shaped burner)
