EN-8
Auto Seek/Preset scan (A/PS)
Preset Scan (PS)
- By pressing shortly, the radio plays each preset station for 5
seconds.
Auto Seek (AS)
- By pressing longer than 1 sec, auto seek is activated. The 6
strongest stations are preset and stored in the corresponding preset number. When
Auto Seek operation is finished, the radio executes the preset scan.
Storing and Recalling Frequencies
If you press any of the NUMBER (1-6) you can easily store up to six broadcast
frequencies for later recall with the touch of a button.
1. Choose a desired BAND.
2. When you find a frequency that you want to store in memory, press a NUMBER(1-
6) and hold until the preset number shows and lit in the display.
. The selected radio station frequency has been stored in memory. The next time
you press the same NUMBER (1-6) the radio station frequency is recalled from
memory.
Note: Up to 6 stations can be stored in each band.
USING THE RDS FUNCTION
What is RDS?
The RDS (Radio Data System) is a digital information system developed by the EBU (European Broadcast Union). Piggy-backed
on normal FM broadcasts, RDS offers a variety of information services and automatic retuning functions for RDS-compatible car
stereos. In 1988, RDS became available in the United Kingdom, France, West Germany, Ireland and Sweden.
‘AF’ Function (Alternative Frequencies)
- Press
AF
to toggle alternative frequency On/Off.
- When AF is ON, the radio checks the signal strength of the AF all the time, when it becomes too weak, the unit search for a
better signal within AF lists then switch to that frequency.
‘TA’ Function (Traffic Announcement)
When pressed short, it is activated as TA mode on or off. When TA mode is on and traffic announcement is transmitted.
– If the volume level was under the threshold point, it will be raised to the threshold point.
‘PTY’ Function (Program Type)
1. Press and hold
PTY
button to turn ON Program type.
. Rotate
VOL
knob to select program type.
. Once desired program shows, simply press
PTY
button once more and unit start searching for available stations.
Note: Program type will flash when searching for stations.
OPERATIONS COMMON FOR MP3/WMA/MPEG4
-10 Tracks Down / +10 tracks Up
1. Press
-10
button to jump 10 tracks backward starting from currently played track.
. Press
+10
button to jump 10 tracks forward starting from currently played track.
Specifying particular track
During playback, all track file names under a folder will be displayed on the screen categorized by Music, Photo, Video. Simply tap
the screen on which category you want to play and rotate the volume knob to select file then push volume know to start playback.
Random Playback
Press
RDM
during playback to play the tracks in random/shuffle order. Press it again to cancel.
Tips:
RDM
is
SHUFFLE
on screen.
Stopping Playback
1. Press
Stop
on remote control during playback to stop playback. That position is stored in memory.
. Press
to continue. Playback starts from the position at which it was stopped.
Note: There is no
STOP
function in audio playback. Audio playback uses
function.
Fast Forward / Fast Reverse
Note:
or
on remote control is the same function as
or
on head unit.
1. During playback, press and hold
or
unit scans at the speed of x - x4 - x8 - x16 - x0
. To resume normal playback at a desired point, press
.
Note: No sound is played during fast forward / fast reverse.
Finding the Beginning of Tracks
During playback, press
or
.
: Press to start playback from the beginning of the previous chapter or track.
: Press to start playback from the beginning of the following chapter or track.
Pause Playback
During playback, press
. Press again to resume playback.
A-B Repeat Playback
This feature allows you to loop playback a section of the movie starting from Point A to B.
1. Press the
button to play the movie.
. Once you have located the section you wish to playback on loop repeat, press and hold
A-B
button. You will see
“Rep-A”
on
the screen.
Preset Memory Station 1-6
Currently Tuned Station
Summary of Contents for RMD 310BT
Page 1: ......
