EN-
2
1
INSTALLATION
PRECAUTIONS
•
Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of
the driver.
•
Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot
air from the heater, or where it would be subject to dust, dirt or excessive vibration.
•
Use only the supplied mounting hardware for a safe and secure installation.
•
Be sure to remove the front panel before installing the unit.
NOTE :
Inclination angle for car radio installation must not exceed 30˚ otherwise the front panel will not open.
NOTE:
Keep the release key in the safe place as you may need it in future to remove the unit from the car.
Detaching and attaching the front panel
The front panel of this unit can be detached in order to prevent the unit from being stolen.
FOLDING DOWN AND DETACHING/ATTACHING THE FRONT PANEL
Before detaching the front panel, be sure to press the
button (1) OFF first.
Then press the
button, let the Front Panel arrive in horizontal position and detach the panel by pulling it
towards you as illustrated.
Notes:
•
Do not press the front panel hard against the unit when attaching it. It can be easily attached by pressing it
lightly against the unit.
•
When you carry the front panel with you, put it in the supplied front panel case.
•
Do not press hard or give excessive pressure to the display window of the front panel when attaching it to
the unit.
CLEANING THE CONNECTOR
The unit may not function properly if the connectors between the
unit and the front panel are contaminated with dirt. In order to
prevent this from happening, detach the front panel by pressing
the
button and clean the connector from time to time.
Clean the connector with a cotton swab together with contact
cleaner as illustrated. Be sure to clean them carefully pin by pin
and make sure not to damage the connecting points.
2
182mm
53mm
3
4
TAP
1
1
2
Bend these
claws, if necessay
<10°
Cotton Swab
Rear of
front panel
Main unit
Summary of Contents for RMD 310BT
Page 1: ......
