13
DVD/VCD/CD Operation (Con’d)
12. Zoom +/-
Press the ZOOM button on the remote control to perform the zoom function. The zoom range is from 1/2 up to 4 (total 7 stages),
according to the zooming intensity.
13. Playing the DVD
After the disc is loaded, the movie of the DVD will be played automatically. The menu will be prompted so that you can choose the
setting. Press the MENU button during playback so that the menu will be shown.
14. Track Time Search
Press the GOTO button on the remote control to search the desired track time to play the Disc. The OSD will be prompted. Make
use of the navigation keys and digit keys on the remote control to choose your desired chapter, track or time. Press the ENTER
button to confirm your selection.
15. Video System
Press the BND/SYS button on the remote control to choose between NTSC, PAL, PAL60, AUTO, according to the encoding format
of the disc. The default mode is AUTO. Use this function if there is something wrong about the display function (eg. no color in
display).
16. Multi-Angle View
Press the ANGLE button on the remote control to perform multi-angle playback. The number of angles change in sequential order.
Note: The number of angles is different according to the disc. The function only work for discs having scenes recorded at different
angles. When no different angle is recorded, the OSD will show “INVALID KEY”
17. Programme Mode
Press the PROG button on the remote control to set the program play. Use the Navigation and Digit keys to set the Chapter and
Track no. as your desired sequence. Press Enter to begin the program play. Press the PROG button and confirm a blank program
again to cancel this operation.
18. Electronic Skip Protection
This unit is programmed with Electronic Shock Protection (ESP) so that the video will be protected against rough roads for 5
seconds.
19. Returning to Main User Interface
Press the arrow on the right hand side of onscreen menu to return to the main user interface.