background image

RCD  212BTi  

manual

3

Owner’ Manual

 Precautions

• This unit will only play the following discs.

Type of disc

CD, MP3, WMA

Label on the disc

Recorded material

Audio only

Size of disc

1

 cm

DO NOT ATTEMP TO MODIFY THE UNIT, MODIFYING THE UNIT MAY CAUSE AN ACCIDENT.

STOP THE VEHICLE BEFORE CARRYING OUT ANY OPERATION THAT COULD INTERFERE WITH 

YOUR DRIVING.

DO NOT TURN ON THE UNIT IF THE TEMPERATURE INSIDE THE VEHICLE IS OUT OF -

0’C TO 

60’C.

THIS PRODUCT IS DESIGNED FOR ONE SINGLE VIDEO OUT PUT, PLEASE USE A SPLITTER IF YOU 

WOULD LIKE TO CONNECT FOR MULTIPLE VIDEO OUTPUT. 

This unit only reads 1

 cm discs.

Don’t attempt to modify the unit; it could result in an accident.

Stop the vehicle before any manipulation which could interfere with your driv-

ing.

Do not use the unit if the temperatures are extremely cold or extremely high 

(lower than -

0° or higher than +60°).

To enjoy a sound of best quality, handle discs as indicated below:
Clean the discs with a cleaning cloth.

Clean each sisc from the center to the out-

side edge.

Don’t use CDs with blobs of glue or 

ink on its surface.

Don’t use Cds with label or stickers on its 

surface.

There  coule  be  some  remainder  of  glue 

which would interfere with the good per-

formance of the unit if labels were starting 

to be rubbed away.

Hold and handle discs by the edg-

es to keep the disc clean and don’t 

touch its surface.

Summary of Contents for RCD 212BTi
























Reviews: