RCD 212BTi • MANUAL
15
Owner’ Manual
1. Choose Radio Band
Press the MOD Button to access the
radio function.
The unit comes with five bands- three
FM Bands (FM1, FM, and FM3) and
two MW Bands (MW1, and MW)
selects. Each of the five bands can
store up to six preset stations, for a
total of 30 preset memory stations.
2. Radio Tune / Seek Function
In Radio Mode, press and hold the
SEEK |<< or >>| Button for seconds,
and the display will show”MANU
SEEK”. Press the SEEK |<< or >>|
Button once to manually adjust the
radio frequency.
3. Tuning
Press the SEEK |<< or >>| But-
ton once the radio will seek the next
strong and clear frequency station.
Repeat to seek more stations in your
listening area with a strong signal.
4. Mono/Stereo Reception Control
In FM radio mode, Press the SEL
Button until "MONO" is shown on the
display. Roate the VOL +/- to select
STEREO or MONO. Improvement of
reception of distant stations can be
done by selecting “MONO” operation
which may cut down some reception
noise.
5. Local / Distant Control
In FM radio mode, Press the SEL
Button until " LOCAL" is shown on the
display. Roate the VOL +/- to select
"LOCAL" or "--DX--".
Local and distance reception setting
can facilitate the radio reception, de-
pending on the location in which the
radio is being used.
6. Save Your Preset Stations
There are six numbered preset but-
tons which can store and recall sta-
tions for each band. While listening to
a radio station you would like to save
as a pre-set, press and hold one of the
buttons numbered 1-6 until you hear a
beep. The button you pressed is now
the pre-set button for that station.
7. Automatic Store/Preset Scan
There are six numbered preset but-
tons which can store and recall sta-
tions for each band. While listening to
a radio station you would like to save
as a pre-set, press and hold one of the
buttons numbered 1-6 until you hear a
beep. The button you pressed is now
the pre-set button for that station.
A. Automatic Scan & Store
While listening to the FM Radio, press
and hold the F/PS Button. The receiv-
er will automatically scan and save
stations of the 3 FM Bands.
While listening to the MW Radio,
press and hold the F/PS Button. The
receiver will automatically scan and
save stations of the MW Bands.
B. Scan & Preview Saved Stations
Press the F/PS button once and the
receiver will scan the radio stations in
the current band.
Radio Operation
Summary of Contents for RCD 212BTi
Page 1: ...RCD 212BTi manual GB...
