Caliber MCD795 Instruction Manual Download Page 72

Page: 72 / 77

Navigation Operation

End user can press the MODE button repeatedly, until the

MAIN MENU

appear on the screen, then press the mode

button to get into the GPS NAVIGATION MODE.

NAVI

VOICE

GPS

Main Menu

GPS

Tuner

Media
Player

AV-In

Setting

Or end user when in any mode, short pressing the

GPS

MODE / TA

button on the front panel, to get into the GPS

NAVIGATION MODE.

3) Unit should start to load the GPS NAVIGATION SOFTWARE

(If the GPS NAVIGATION has not been activated before, or
the GPS NAVIGATION is not in used),and the

ATTENTION

SCREEN should appear. Sometimes the loading of the GPS
NAVIGATION SOFTWARE may take a while, but this is
normal. End user should read the

ATTENTION

CONTENT

CAREFULLY before pressing the

button.

When in AV IN Mode, end user can tab on the touch screen,
to bring up the menu, and then press on the button
ON THE TOUCH SCREEN to get into the GPS
NAVIGATION MODE.

NAVI

Summary of Contents for MCD795














































































Search results

Summary of Contents for MCD795

Reviews:

Related manuals for MCD795

Brands by name

Popular brands

Caliber MCD795, Instruction Manual

Search results

Summary of Contents for MCD795

Reviews:

Related manuals for MCD795

Brands by name

Popular brands