54
4.6.1.5 Cockpit screen layout
Their content is fixed in Cruise mode (when there is no active route), but for
Navigation mode you can change their content on this screen. The available values
are listed.
4.6.2 Backlight settings
Here you can see how the display backlight behaves when using this GPS device.
4.6.2.1 Power Management
At the top of the screen you can set how the backlight behaves when the screen has
not been touched for a while.
Backlight always on
You can choose to have the lights always on.
Smart Powersave
You can also initiate this special feature of this GPS device. When running on Smart
Powersave will light up the screen only when you press or tap a button, or if this
GPS device has something to show you. After a few seconds the light level
decreases, and after another few seconds the backlight turns off. This helps you
achieve a longer battery life. This feature is needed in Portable Navigation.
4.6.2.2 Brightness
With this switch you can instruct this GPS device to use the original settings of the
device, or you can set the backlight level separately for both daylight and night
modes, thus enhancing the effect of the night color scheme.
The values are between 0 and 10, where zero means there is no backlight at all, and
10 represents the maximum backlight value.
4.6.3 Smart Zoom
Smart zoom is a lot more than just a usual automatic zoom.
While navigating a route:
when approaching a turn, it will zoom in and raise the
view angle to let you easily recognize your maneuver at the next junction. If the next
turn is at a distance, it will zoom out and lower the view angle to be flat in order to let
you see the road in front of you, or it can even switch to an Overview mode to let you
follow your position on the map.
While cruising:
if there is no active route and you are just driving, Smart Zoom will
zoom in if you drive slowly and zoom out to the limit set here when you drive at high
speed.
These automatic features can be set up on this screen.
