12
LP TANK RESTRAINT FOR BUILT-IN INSTALLATION
If the grill is to be installed in a Built-in application, then the grill must be installed in accordance with the Built–in instal-
lation guidelines. If you intend to operate your Built-in grill on LP gas utilizing a 20 lb Type 1 cylinder, then the Built-in
LP tank restraint must be installed prior to initial use of the grill.
The following steps will illustrate how to properly locate and install the LP tank restraint within the Built-in enclosure.
NOTE:
The grill comes with the LP Regulator/Hose assembly installed at the factory. The assembly, along with the entire grill
system, is leak tested. Do not remove the Regulator/Hose assembly from the grill during installation.
Fold down LP Tank restraint harness
over top of the LP tank as shown
Once the LP Tank Harness of fitted over the
LP cylinder collar as shown, screw the in-
cluded LP regulator hose assembly to the LP
tank, open LP cylinder top valve and check
for system leaks before lighting the grill
Summary of Contents for CGP42-2G-1SR-L N WH
Page 31: ......
