21
Installation /
Assemb
ly
Fireplace Owner’s Manual
LTR50001006, Rev. Q
www
burn and as a general rule, the air shutter for propane installation
should be completely open, and the air shutter for NG installation
should be mostly closed. This can be adjusted later to create a
5. Refer to photo below for proper placement of parts. The washer
should insert next to the protective screen cover, then the spring is
be threaded into the end of the fuel inlet leading into the burner.
6. Connect natural gas supply hose (not included with kit) from sup-
ply source. Test for leaks.
7.
-
adjusted you can adjust air intake by turning the protective screen
cover and air intake sleeve on the fuel supply tube.
assembly
burners