background image

 SAFETY INSTRUCTION

This safety alert symbol will be used in this manual to draw attention to safety related instructions. 

When used, the safety alert symbol means 

ATTENTION! BECOME ALERT! YOUR SAFETY IS 

INVOLVED! FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN A SAFETY 

HAZARD.

CAUTION:

 All work must be performed by qualified personnel trained in the 

proper application, installation, and maintenance of systems in accordance 

with all applicable codes and ordinances.

CAUTION:

 Over-tightening and breakage can occur with the use of Teflon

®

pipe joint compounds. Teflon

®

 provides lubricity so that care must be

exercised not to over-tighten joints. Failure to follow these instructions

could result in property damage and /or personal injury.

CAUTION: 

Electrical shock hazard. Disconnect ALL power sources when 

installing  or  servicing  this  equipment  to  prevent  eletrical  shock  or  

equipment damage. Failure to follow these instructions could result in property 

damage and/or personal injury. 

Caleffi shall not be liable for damages resulting from stress corrosion, misapplication or misuse of it products.

2

WARNING: 

This product can expose you to chemicals including lead, which is known 

to the State of California to cause cancer and birth defects or other reproductive harm. 

For more information go to www.P65Warnings.ca.gov.

Summary of Contents for Uni-Switch 626 Series









Reviews: