background image

Electrical Connections: 

Unscrew the four cover screws and lift off the outer cover .

Flow  switch used to  activate  a  device  when  
flow  stops.  When  the  decreasing  operating 
flow is reached or stops the common (black 
wire) and the normally open (red wire) contacts 
open, while the common (black wire)  and  the 
normally closed (blue wire)  contacts  close. 

Flow  switch is used to activate a device  when 
flow starts. When flow starts and  the increasing 
operating flow is reached or exceeded, the 
common (black wire) and normallyopen (red 
wire)  contacts  are  closed, while the common 
(black wire) and the normally closed (blue wire) 
are open. 

 Diagrams showing the internal connections of the micro-switch with: 

CAUTION:  

Make  sure  the  wires  do  not  obstruct  the  

function of the switch mechanism. 

AVERTISSEMENT: 

Assurez-vous que les fils ne 

sont pas entraver le fonctionnement de la changer le  
mécanisme. 

5

CAUTION: 

In order to maintain NEMA 3 (IP54) protection of internal switching components, included 

strain relief must be used.

AVERTISSEMENT: 

Afin de maintenir la protection NEMA 3 (IP54) des composants de commutation 

internes, le serre-câble inclus doit être utilisé.

Summary of Contents for Uni-Switch 626 Series









Reviews: