8
To set up the gateway for MAC systems follow the instruction below:
1 - Open “System Preferences”
2 - Go to “Network” and choose the Ethernet system connected,
fill the correct setting for the IP BACnet gateway address
Connecting to gateway Web Configurator
After setting a local PC on the same subnet as the gateway (previous chapter), open a web browser on the PC and enter the IP Address of the gateway;
the default address is 192.168.1.24.
NOTE: Below the “Active profiles” heading, the profiles for connected devices are listed. If no profiles are present, then wiring,
baud rate and DIP switch settings must be checked, because there is a problem with device communications. All the
active profiles must show the correct Node-ID’s before proceeding.
NOTE: If multiple devices are connected to the gateway, set the Virtual Server Nodes field to “YES”; otherwise leave the field
on the default “No” setting.
After setting the local IP address of the gateway, to show the parameters of the connected device, following the screens below.
Select the command “Configure” (1) and the command “Profiles Configuration” to enter on the “Configuration Parameters” menù.
2
1
