21
Settings > Events > M-Bus Events
In this section you can set conditions with data input from meters in the plant to control outputs
O1
and
O2
. Press the
New Event button to create a new event
Select the meter of interest from which to obtain the event setting value
Once the meter has been selected, specify the type of condition, from among:
•
Maximum value
: condition set in accordance with the maximum value acquired by
the parameter
•
Minimum value
: condition set in accordance with the minimum value acquired by
the parameter
•
Out of range
: condition set in accordance with the range acquired by the parameter
•
M-Bus status indication
: condition set in accordance with the creation of a new
meter event. Refer to the meter documentation to enable this condition