CALEFFI DATA EASY, Quick Manual, Page: 2 / 40

1
TECHNICAL SPECIFICATIONS
DATA EASY is a hardware device made in compliance with industrial standards without moving parts and designed for
DIN rail mounting in an electrical cabinet. The salient technical specifications of the device are shown below:
ELECTRIC SPECIFICATIONS
Electric supply 24Vdc +/- 10%, 24Vac (min 20Vac, max 40Vac), alternatively PoE (IEEE 802.3)
Installation category Class II
Maximum power consumption 7.5W
Ethernet
- N°2 (1 MAC): ETH1: Ethernet 1(PoE), ETH2: Ethernet 2
Communication standard - RS485
Communication protocol - M-bus
-
MECHANICAL SPECIFICATIONS
Temperature range Operation: -10°C to +55°C / Warehouse: -25°C to +65°C
Dimensions 90x71x62 mm (HxWxD) – DIN
Mounting 35mm DIN rail (EN60715)
Protection class IP20 (EN60529)
WIRED M-BUS INTERFACE
Baud rate 9600bps
Number of meters supported max 250
Readout interval 15 min / 60 min* / 6 hours / 12 hours / 1 day (*factory setting)
Acknowledge collisions on M-Bus network Yes
Devices search / acquisition Via Primary and/or Secondary address
Devices supported *7554 - *7557 - *75525 - 7504 -7507 Series Conteca Meter
*With year of production from 2015
Supported configuration For two-pipe systems
DATALOGGING
Data retention 1 year for intra-day data arriving from wired meters
Reports XLS or CSV format
Transmission method
Mail SMTP, FTP (Client), Webserver (Report creation and download)
Reports generation planning Daily / Monthly / Two-monthly / Three-monthly / Four-monthly / Six-monthly /
Annual
USER INTERFACE
Display Graphic, backlit, 16-bit grayscale, multilingual
HTTP Multilingual webserver for consultation of data and configuration
LOGIC / ALARMS / PLANNING
Alarms notification from M-Bus network
Meter faults/alarms, communication anomalies, thresholds surpassed
Scheduled actions Send readouts report