CALEFFI 521312TM, Installation, Commissioning And Servicing Instructions

Page: 1 / 20

CALEFFI
Thermostatic Mixing Valves
Installation, commissioning and servicing instructions
38650
General
The Caleffi 5213TM series is a high performance
thermostatic mixing valve and has been specifically
designed and manufactured to meet the
requirements of
“AS 4032.1 Thermostatic Mixing
Valves-Materials, Design and Performance
requirements”
.
In certain sections of our society, there is a need to
protect the most vulnerable from the danger of
scalding caused by hot water. Hence, the need for
thermostatic mixing valves.
The Caleffi 5213TMTM series provides water at a
safe and usable temperature in situation where the
control of the temperature of the water discharging
from a terminal fitting is of the utmost importance,
i.e. within hospitals, schools, nursing homes, etc.
The valve is designed to prevent the flow of water
discharging from the mixed water outlet in the event
of the failure of hot or cold supply.
The valve is complete with strainer and check valve
at both hot and cold inlets.
Product Range
Item code 521312TM: with strainers and check valves at the inlets 15 mm (1/2”)
male,compression end connection for copper pipe.
Item code 521319TM: with strainers and check valves at the inlets 20 mm (3/4”)
male,compression end connection for copper pipe.
Safety
The Caleffi 5213TM series thermostatic mixing valve can give stable operation provided it is
installed, commissioned and maintained as per the recommendation outlined in this manual.
This valve cannot be considered as an alternative to adequate duty of care during its use and
operation.
AS 4032.1
WMKA 02466
www.caleffi.com
5213TM series
1
F. istr. 38650_5213 9-07-2007 14:04 Pagina 1